©2008 Perco AB

Tub machine type VBL

The rectangular tub machines type VBL are used for deburring, smoothening and polishing operations of parts of medium/big dimensions.
The tub of the machine, lined with highly wear resistant hot cast polyurethane, can be manufactured with a capacity from 220 up to 2500 liters.
The two mechanical vibratory units, fitted at each end of the tub, are powered by two independent electric motors thus producing even distribution of energy to the mass load.
The further advantage of this system is the fact that the motors do not suffer the vibration of the tub, thus avoiding stress problems and possible cracks.
 

Tub machine type VB

The rectangular tub machines type VB are the ideal machines for the ball burnishing process of parts of medium/big dimensions.
The VB machines are equipped with motors running at 3.000 r.p.m., and for this reason are the fastest machines for the polishing process on the market today.
Two mechanical vibratory units are fitted to the tub, one at each end, and are powered by two independent electric motors thus producing even distribution of energy to the stainless steel ball
mass.
The capacity of these machines can vary from 17 up to 2000 liters.
 

MINOX

The MINOX bench type models are particularly designed for the treatment of small parts in small batches and can be used with abrasive media for deburring and stainless steel balls for ball
burnishing.
The MINOX machine is especially used for small parts as jewellery, electrical components, spectacleframes,…